jbits.se

Add the following text to OS Boot Parameters under your VMs Startup options: rw init=/bin/bash
Boot your Access Gateway VPX VM, you'll be presented with a bash prompt.
Run the following to change specified text in the default (english) logonpage:

sed -i 's/User name:/Anv\ändarnamn:/g' /runtime/S0/etc/en/login.html
sed -i 's/Password:/L\ösenord:/g' /runtime/S0/etc/en/login.html
sed -i 's/Welcome/V\älkommen/g' /runtime/S0/etc/en/login.html
sed -i 's/Log On/Logga in/g' /runtime/S0/etc/en/login.html

Remove the OS Boot Parameters and reboot your AG VPX.

tcpdump -s 0 -i eth0 -c 10 -w - -U | tee capture.pcap | tcpdump -n -r -
Full packets are written to capture.pcap, at the same time tcpdump -r decodes the stream to console.

-s 0 (Whole packets)
-w - (Write output to console)
-U (Do not buffer output)

Preparations

Allow HP SMH (TCP2381) and SNMP to the modules from selected stations

Log in and create a temporary directory (e.g. /var/HPAgents)

Download the following packages from www.hp.com for your hardware / RHEL3

• hpasm (System Health Application and Insight Management Agents)
  201002, latest version: hpasm-7.8.1-116.rhel3.i386.rpm
• cmanic (HP NIC agent), and the optional
  201002, latest version: cmanic-7.7.0-5.rhel3.linux.rpm
• hpsmh (System Management Homepage)
  201002, latest version: hpsmh-2.1.8-177.linux.i386.rpm

Download the splat_hpasm_support_files.tgz support files
http://www.opsec.com/solutions/partners/hpasm.html

Installing System Management Homepage (optional)

Login as expert on SPLAT and create the following file:
    echo "Red Hat Enterprise Linux ES release 3 (Taroon)" > /etc/redhat-release

Install the hpsmh package:
    rpm -ivh hpsmh-2.1.8-177.linux.i386.rpm

Install support files for HPASM

Extract the Splat hpasm supportfiles:
    tar xzvf splat_hpasm_support_files.tgz splat_hpasm

Copy the IPMI sysconfig file (If your system has an iLO2 Mgmt Controller)
    cp splat_hpasm/init_scripts/sysconfig_ipmi /etc/sysconfig/ipmi

Copy the IPMI init script for your kernel version (Check with uname –r)
    cp splat_hpasm/init_scripts/2.4_init_ipmi /etc/init.d/ipmi

Copy the libstdc++-3-libc6.2-2-2.10.0.so file to /usr/lib and set up a link
    cp splat_hpasm/libstdc++-3-libc6.2-2-2.10.0.so /usr/lib
    ln -s /usr/lib/libstdc++-3-libc6.2-2-2.10.0.so /usr/lib/libstdc++-libc6.2-2.so.3
    chmod 755 /usr/lib/libstdc++-3-libc6.2-2-2.10.0.so

Enable SNMP

Snmp service enable

Install HPASM

Remove any previous versions if present:
    rpm -e hponcfg
    rpm -e cmanic
    rpm -e hprsm
    rpm -e hpasm

Install the HPASM package
    rpm -ivh hpasm-7.8.1-116.rhel3.i386.rpm

Install the NIC Agents
    rpm -ivh cmanic-7.7.0-5.rhel3.linux.rpm

Configuration

Backup your snmp config files
    cp /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf-pre-`/bin/date +%Y%m%d`
    cp /etc/snmp/snmpd.users.conf /etc/snmp/snmpd.users.conf-pre-`/bin/date +%Y%m%d`

For first time configuration run:
    hpasm activate

To reconfigure run:
    /etc/init.d/hpasm configure or /etc/init.d/hpasm reconfigure

Do you wish to continue? <y/n> (blank is y) y
Do you want to load the hp modules even though they may "taint" your kernel? <y/n> (Blank is y) n
Do you wish to use an existing snmpd.conf (y/n) (Blank is n): n

Do you require SNMP agents (y/n) ? (Blank is y): y
Do you require Storage Agent support (y/n) ? (Blank is y): y
Do you require performance agent support (y/n) ? (Blank is y): y

Enter the localhost SNMP Read/Write community string
(one word, required, no default): ********
Re-enter the same input to confirm:********

Enter localhost SNMP Read Only community string
(one word, Blank to skip): ********
Re-enter the same input to confirm: ********

Enter Read/Write Authorized Management Station IP or DNS name
(Blank to skip): [Blank]

Enter Read Only Authorized Management Station IP or DNS name
(Blank to skip): [Blank]

Enter default SNMP trap community string
(One word; Blank to skip): [Blank]

Enter SNMP trap destination IP or DNS name
(One word; Blank to skip): [Blank]

Enter system contact information
(Name, phone, room, etc; Blank to skip): [Blank]

Enter system location information
Building, room, etc; Blank to skip): [Blank]

Do you wish to disable hpsmh support (y/n) (Blank is n):n

Do you wish to keep CCISS device handle open (y/n): y

Restore snmpd.users.conf:
    mv /etc/snmp/snmpd.users.conf.bak /etc/snmp/snmpd.users.conf

Restart SNMP Daemon
    service snmpd restart

--- main.cf --------------------------
recipient_bcc_maps = hash:/etc/postfix/map_bcc
sender_bcc_maps = hash:/etc/postfix/map_bcc

# cat /etc/postfix/bcc_map
@capture.domain bccto@recipient.domain

--- Compile map_bcc

# postmap /etc/postfix/bcc_map

sed -e 's/#.*//; /^$/d' filename.conf